Product Categories

Lens Front Maintenance LED Display

[5]

Lens Backside Maintenance LED Display

[26]

City Roadside Variable Message Sign

[14]

Vinyle Printing LED Gas Price Signs

[13]

Pixel Cluster LED Gas Price Sign

[20]

Custom Finger Rings

[1]

Contact Now

SHENZHEN GLARE-LED OPTOELECTRONIC CO., LTD

Visit Website

City:shenzhen

Province/State:guangdong

Country/Region:china

Contact Person:MrsTracy Liu

View Contact Details

Contact Now

China Portable Pole Mounted Radar Speed Display 12inch 13.4inch Solar Power Radar Detection wholesale

Portable Pole Mounted Radar Speed Display 12inch 13.4inch Solar Power Radar Detection

Ask Latest Price

Video Channel

Place of Origin :China

Price :Negotiable

Waterproof level :IP65

viewing angle :≥30°

Brightness :≥10000 CD/㎡

Driving mode and IC :static constant current

height :12inch/13.4inch

Speed range :2~400KM

Detect the distance :10~100M

Input voltage(AC) :220V

Peak power(W/㎡) :50W

Contact Now

Add to Cart

View Product Description

12inch/13.4inch Solar Power Radar Detection Pre-warning Sign for Highway Car Speed Limit Panel

Portable Pole Mounted Radar Speed Display 12inch 13.4inch Solar Power Radar Detection

Products Overview

>> LED radar speed signs made in 2 or 3 7 segment digit, can set the limit speed number by remote controller. Inform the driver
limit speed: show green number in limit speed and show red number out of limit speed.
>> When the vehicle drive into the radar detection area (about 100m in the front of radar sign), the microwave radar will
automatically detect the speed of the vehicle and the speed will be displayed in the sign to remind the driver to reduce driving
speed, which Effectively reduce the road traffic accidents caused by high speed driving.
>> Speed feedback device has a significant eye-catching induction driving function, can significantly reduce traffic accidents, to
achieve safety guidance.

Product Parameter

12'' Digitals Height

13.4'' Digitals Height

Speed Feedback Device Components

1.Speed limited sign (indicating the speed limit of the road section)
2.Such as "Please note your speed" and a dynamic LED (Conductor light-emitting diode) display, the above data shows the vehicle's
speed
3.Microwave radar test the speed
4.Solar power with solar power supply system

Speed feedback device install instructions

1.Fix the solar panel on the frame, and then fixed on the speed feedback instrument with screws and nuts. The white wires are used to connect the solar panels and the batteries in the speed feedback box, and the positive and negative electrodes are connected one by one.
2.The speed feedback device fixed on the road left or right, or just above the road ,so that the direction of the radar port to the car, the tilt angle of not more than 15 degrees, if it is fixed above the road, the radar fixed position should be radar Cavity oblique angle alignment to the car location. At the same time, the higher the distance between the radar and the ground, the farther away the radar work. Generally, The distance from the ground to radar in 2-7 m is better.
3.Open the speed feedback device's back cover, connected The radar data cable, control board connector one by one. And then adjust of the radar position, so that it position the car.
4.When the speed feedback device over the top,fixed the speed feedback with a screw to the column.

Project Case

Contact

Shenzhen Glare-LED Optoelectronic Co., Ltd Add: 1-4 floor, B2 building, No. 10 Tongqing Road, TongXin village, Baolong avenue, Longgang District, Shenzhen City, Guangdongprovince, China P.C: 518116

Inquiry Cart 0